Hygeia Isolat telefon / Steril telefon (Med glatt overflate for sterile og støvfrie miljøer) Standard Analog og SMART Analog versjoner. Også kjent som Sykehustelefon, Operasjonsromtelefon og Laboratorietelefon.Midt i blinken for matvareprodusenter der det er mye fuktighet og strenge krav til bakteriefritt miljø og mye renhold.

Hygeia 4
Hands Free Sterile Area Telephone
• Full key pad
• Flat membrane fascia,
resists contamination
• Hands free operation (VOX)
• DTMF/LD dialling
• Audio-visual ring indication
• REN 1
• CE Compliant
• Flush or surface mounting
• Volume adjust on
installation

The Hygeia is a fully electronic telephone that
incorporates many features found on modern
commercial telephones. It provides hands-free
loudspeaking communication facilities, as
intercoms PBX switching, or coupled direct to
the public telecom network.
Hygeia is a flush or surface mounted unit
incorporating a flat membrane operating
panel. When installed with suitable interface
sealants, a very high IP water resistant rating
can be achieved.
The operating membrane is an impermeable
multilayer chemically inert polyester.
Incoming calls are indicated by a flashing LED
beacon and audible warble tone. To aid
intelligibility, a volume control button is
provided for noisy environments.
Call termination can either be through button
depression, automatic time out or remote
command.
Ringer operation is selectable either at
installation or as remote programming.
Hygeia can be configured to be fully
compatible with most PABX’s or PTT
networks. Loop disconnect (LD) and tone
dialling (DTMF) systems are remotely
selectable, as are recall systems, timed break
recall (TBR) and earth loop recall (ELR).
Available as 18 button with 2 memory keys
and volume (VOL) button.

TECHNICAL SPECIFICATION
Speech:
Tested to the CTR21 specification.
Voice-switched (VOX) semi-duplex operation.
Additional half-duplex mode controlled remotely (optional local
push-to-talk button)
Send & Receive levels remote programmable (1dB step)
Receive volume control button(s) adjusts level by +/- 6dB
Call timeout programmable from 1 to 42 minutes
Remote switch-off capability
Euro-wide network matching (factory set)
Dialling Data:
LD (pulse dialling) : 66:33, 10 ips, 800ms IDP
DTMF: 100ms to ITU-T Q23
Recall: TBR (Timed Break Recall),100ms or ELR (Earth Loop
Recall)
Other formats (factory set):
LD: 60:40, 10ips, 500ms / 800ms IDP
DTMF: 50ms
TBR: 300ms or 600ms
Full keypad with 2 memories, Recall and Volume button.
Safety: Tested to EN41003 and EN60950.
Ringing and Remote Maintenance:
Dual tone ringing through loudspeaker >75 dB @ 1m REN 1.
Auto-answer for remote programming: 0 to 15 rings.
Speech disabled during remote programming: call cleared
down in favour of user dialling.
Sensing: Remote sensing of network loop current (2.5 mA
resolution) and power-supply connection.
Power Supply: Regulated power supply required 9-12Vdc
@ 500mA (included).
Memory Retention (autodiallers):
E2 PROM - 10 year life.
Temperatures:
Operating: -20° C to +55° C
Storing: -40° C to +70° C
Relative Humidity: Up to 95% (non-condensing).
Weather Resistance: Up to IP65 dependent on installation.
Please call for advice on application.
Casing Material: Front face plate membrane is an
impermeable multilayer chemically inert polyester.
Colour: White with blue printing
Weight: 1.1kg (3kg with backbox)

Overall: 352H X 181W X 48D mm
Fixing: 307H X 166W mm CRS
Cut out: 275H X 100W mm
ORDER CODE
Hygeia with back box
028-02-1408-90A
no back box
028-02-1408-900

This mark indicates
compliance with the
following directive;
R&TTE Directive 1999/5/EC
Optional Induction Loop for hearing impaired
This mark indicates compliance for inductively coupling to
Hearing Aids having a `T' switch position
Tested to ETS 300-381 and in accordance with ITU-T P37