Specifically developed for rescue swimmers andSAR crews
iriComm 3.0 combines a waterproof and rugged headsetwith superior sound quality
Advancred noise reduction
Comfortable fit for prolonged working hours in extreme environments
Hodebøyle eller hjelmfeste
Opsjon med eller uten Hear Through (ANC - Active Noice Cancellation, ANR - Active Noise Reduction). Denne funksjonen gjør at bruker kan lytte i omgivelsene, høre varsling og føre direkte nærsamtale. Ved aktivering dempes intercom volum/tilsluttet radiosamband med 2424dB. På denne måten beholdes oppmerksomt nærvær ved aktivtet i sambandene.
Opsjon med LED lys med 3 funksjoner:
Dimmed light for map reading
High beam for orientation
Strobe light for localization
Opsjon dynamisk eller electret mikrofon
IWCS iriComm 3.0 inngår i Iricomm systemet for full duplex kommunikasjon i ekstreme miljøer
Wideband sound quality
Fully sea waterproof!
Heavy duty construction for use in extreme situations
Advanced noice cancelling microphone with (max. SPL 142 dB.)
Peer - peer conectivity (twinmode between 2 units)
Konstruert for å gi god lydkvalitet under ektreme forhold
Tett konstruksjon perfekt for støyfylte, våte, salte miljøer som:
Søk og redning
på Rib, Sjøbjørn, Redningsbåt
Arbeids på dekk
I maritime miljøer som oppdrett, kai, lassing/lossing
Garantitid: 1 år
Vanntett IPX7 (kan leveres i MIL version IPX8)
Frekvensintervall: 120 - 18.000 Hz
Wideband lyd i intercommode
Bluetooth 3.0 kompatibel, Klasse 1
Støtte for A2DP (strømme musikk)
Trådløs PTT (IWCS, Peltor og Motorola)
Batteritid 15t i intercom mode
80% lading etter 2 timer
Lydvarsling for høy, med., lav
USB ladekabel medfølg
Vekt 495 g
Trådløs 2.4 GHz kryptert standard
Bluetooth 3.0 multiconnection (flere enhter kan være sammenkoblet samtidig)
Sammenkobling 1: For sammenkobling av mobiltelefon med støtte for både tale og strømming
Sammenkobling 2: For sammenkobling til IriSound for full duplex kommunikasjon.
Sammenkobling 3: P2P (Peer to Peer) - max 2 iriComm 3.0 headset kan sammenkobles for trådløs full duplex.
Selv med to sammenkoblinger kan bruker besvare mobilsamtaler i headset/strømme. Etter avsluttet samtale, går headset tilbake til full duplex intercom. Denne protokollen kan også brukes ved sammenkobling mot radiosamband.
Embedded Motorola og Peltor standard PTT blueooth protokoll for nøkling mot samband fra PTT knapp på headset.
Rekkevidde opp til 80 meter, med ved bruk i iriSound intercomsystemkan rekkevidden økes med installasjon av eksterne antenner.
Stand Alone Headset - iriComm 3.0 can connect to a Mobile Phone and have Music Streaming at 44.1 KHz quality. Incomming calls can be answered directly from the headset andMusic Streaming will be set on hold immediatey. When either the caller or the user hang up the call, the Music Streaming reconnects immediately.
In a Peer To Peer setup, the 2 headsets can have a simultanious Mobile Phone Connection. The 2 users will have Full Duplex Intercom. Any incomming Phone calls can be accepted directly from the headset, and will when accepted, disconnect the intercom as long as the Phone coversation is ongoing. When the Mobile Phone call is hung up the Intercom mode is reactivated instantly.
In an iriSound Intercom with more than 2 users and maybe external radio connections, the iriComm 3.0 headset will provide Full Duplex Intercom to all users. External radios will be integrated into the solution and allow everybody to hear everything... Using an iriSelect - up to 9 talk groups can be defined.
iriComm 3.0 Wireless has Voice Prompts which gives the user Audioable information when any change is made. Prompts for connections or lost connections, Battery Status, ON / OFF information, Charge Mode, pairings etc.
The Built-In 800 mAh Li-Ion battery combined with the low power consumption make it possible to maintain use up to more than 30 hours - at that even with an average use of Hear Through mode and High Bright LED ( PLUS Versions only )
The Speed Charge Circuit let iriComm 3.0 gain another hour of use in just 3 minutes.
The PLUS Version includes 2 extra features:
Hear Through Function when activated will decrease the intercom/radio RX by 24 dB and simultaniously open the external microphone letting the user have a conversation with people in front of them, without removing the headset or the helmet. The Hear Through Volume can be adjusted to an comfortable level.
High Brightness LED feature provides 3 modes. First mode is a soft reading light. Only 20 % of the Full Power will allow the user to read and see things right in front without interrupting the night vision of people around. Second mode is a Full Power Mode which will allow the user to orientate in total darkness. Third mode is a 3 Hz Full Power Strobe which will let the user be located up to 2 km away.
Specifically developed for Rescue Swimmers and for use in loud surroundings with the best performance, iriComm 3.0 has impressive specifications e.g. is waterproof, patent pending RX Technology and Noise Cancelling Microphone that goes up to an impressive 142 dB SPL., which is nessesary for helicopter use.
Working in rough conditions, as Helicopter Rescue Swimmer, in TacTeams or Fire departments, the importance of clear and uninterrupted communication at sea can not be underestimated. In many cases it is what separates success from failure. Weather conditions, surrounding noise, distance to coworkers - all factors potentially making clear communication difficult or impossible.
iriComm 3.0 Ear-cups can be fitted to a large range of helmets. The Ear-cup brackets have a standard 88mm spacing, allowing for easy fitting of a variation of helmet brackets supporting Tactical helmet rails, Marine Safety Helmets, Construction Helmets (hard hats) and even flight hel- mets.
Dialectric Screw on (KASK)
Ops-Core / Emmerson
Team Wendy Exfil
Gentex Alpha 800 / 900 / Eagle
If mounted in a flight helmet, IWCS has developed the F16 inspired cable junction, that makes it possible to add the main radio lead, in the neck on almost any helmet.
The PLUS Package is an addition to the basic headset:
High-Bright LED This feature provides three very useful light modes. Dimmed mode provides sufficient light for reading a map held in your hands without causing too much disturb- ance of your night vision or the people in your vicinity. High-beam mode lights up the path in front of you, and makes it possible to move around and navigate in total darkness. In Strobe mode the LED continuously emits powerful flashes at a constant frequency helping others locate you in the dark. Even a mile or two away a heli- copter without FLIR equipment will be able to easily locate your position.
3D GEL Ear-pads To increase the passive noise attenuation of the headset as well as improve the physical fit, IWCS has developed a 3D GEL Ear-pad. The design of the Ear-pad ensures a closer fit against the cranium around the ear. This option provides up to an extra 5dB of passive noise attenuation
Hear-Through mode Hear-Through mode makes it possible to have a “local” conversation and hear what is happening around you without removing the headset. When Hear-Through mode is enabled, sound from the intercom system or connected radio is attenuated by 24dB. This allows for monitoring intercom or radio traffic while engaging in “local” conversation.
Revolutionary new design With its unique and patented design iriComm 3.0 is engineered to provide best in class audio quality under extreme conditions. The use of high-grade silicone and stainless steel in combination with a completely sealed construction make iriComm 3.0 the ideal choice for those working in noisy, wet and salty environ- ments.
Wireless connectivity iriComm 3.0 uses encrypted, spread-spectrum data communica- tion in the 2.4GHz band, and is Bluetooth 3.0 compatible. iriComm 3.0 supports multiple, simultaneous wireless connec- tions
Mobile Phone Connectivity Pairing mode one is intended for connection of a cell phone making it possible to answer calls using the iriComm 3.0. Incom- ing calls can be answered on the headset itself by a push of a button. There is support for both HS and HFP profiles. Music streaming is also possible via the A2DP protocol
iriSound Marine Intercom Pairing mode two is intended for connection to an iriSound marine intercom system. While being part of a full-duplex inter- com conversation incoming cell phone calls will be announced in the headset allowing the user to either dismiss or accept the call. After concluding the phone call, the headset automatically re- verts back to intercom mode.
Wireless PTT Pairing mode two is also used when connecting the headset to a hand-held radio with wireless PTT support. iriComm 3.0 supports wireless PTT function according to Peltor and Motorola standard. When iriComm 3.0 is part of an iriSound intercom system the wireless PTT function will be able to key external radios being part of the iriSound intercom system
Peer-to-Peer functionality Pairing mode three is used for iriComm 3.0 P2P functionality. P2P enables two iriComm 3.0 headsets to be wirelessly connected forming a stand-alone, full-duplex intercom system.
Speed Charge The build-in LiIon battery typically provides continuous operation for 15 hours or more depending on actual use case, and due to the Speed Charge function, the battery will regain 80% capacity after less than 2 hours charging
Voice Prompts iriComm 3.0 provides audible, human voice responses to commands, guides the user through pairings and setup, and alerts in case of incoming calls, low-battery condition, loss of wireless connectivity etc.
Range iriComm 3.0 is designed for short to medium range wireless connectivity, and typical range is up to 80m line-of-sight. The actual achievable range will vary depending on local factors. When used in an iriSound marine intercom system, the range can be extended significantly by using external anten- nas in the fixed installation.