Icom IC-M605 #25 VHF Marine mobile, 25W/AIS RX/CE/HM-205RB/D
- Multi-station VHF system which will allow up to three COMMAND HEAD/COMMANDMIC to be connected
- Easy to read Colour TFT LCD with Wide 4.3” Viewing Angle
- Integrated AIS Receiver
- Intuitive User Interface
- Class Leading Receiver Performance
- Active Noise Cancelling Technology
- Last Call Voice Recording
- Integrated GNSS Receiver
- 30 W Two-Way Hailer and Automatic Foghorn
- NMEA 2000™, NMEA 0183/-HS Connectivity
Up to Three COMMAND HEAD™/COMMANDMIC™
All functions of the IC-M605 (including DSC and distress operation) can be remotely controlled with up to three controllers, RC-M600 COMMAND HEAD™ and/or HM-195 series COMMANDMIC™, with an intercom function available among the main radio and controllers. The system allows for maximum operating flexibility anywhere on your boat.
Wide Viewing Angle 4.3-inch Color TFT LCD
First in its class, the color LCD provides nearly a 180 degree viewing angle. The 4.3-inch wide display has high resolution characters and function icons. The night mode screen provides the optimal viewing brightness for comfortable operation in the dark.
Integrated AIS* Receiver
With an integrated AIS receiver, the IC-M605 can show real-time AIS vessel traffic information on the display. The AIS combo screen enables you to monitor the AIS plotter during basic operation. You can directly call a selected AIS target from the AIS screen using an individual DSC call.
* An optional UX-251 AIS receiver unit is required, depending on version.
Intuitive User Interface
A combination of the directional keypad and soft keys provides simple operation. Most used functions are assigned to soft keys (at the bottom of the display) for quick one push function access. The large ten-key pad enables you to smoothly enter channel numbers, MMSI numbers with ID names and so on.
Class Leading Receiver Performance
A weak signal adjacent to a strong signal can be clearly received by the IC-M605. Its commercial grade receiver performance (selectivity and IMD: more than 80 dB) provides reliable communication at all times.
Active Noise Canceling
The Active Noise Canceling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment.
Last Call Voice Recording
The last call voice recording function automatically saves up to two minutes of an incoming call. Don’t miss any incoming messages.
Private Conversation
With an optional voice scrambler unit, UT-112, the IC-M605 provides 32 tone secure conversation. This function is useful when you want to share private information with consort ships.
Provides Clear, Loud Audio
The IC-M605’s internal speaker enhances intelligibility of received calls. The waterproof, paper speaker-cone provides superior sound quality with a wide frequency range and a flat frequency response for powerful, yet clear audio.
30 W Two-Way Hailer and Automatic Foghorn
When connected to the optional horn speaker, SP-37, you can talk with crews on the deck or shore from the radio’s microphone and can hear any reply via the horn speaker. Also available the RX hailer function and four patterns of automatic foghorn.
NMEA 2000™, NMEA 0183/-HS Connectivity
Using NMEA 2000™ connectivity, the radio can exchange GNSS, AIS reports, DSC call information data, radio frequency and PGN list data on the network. NMEA 0183/-HS GNSS position data Private Conversation can also be converted to NMEA 2000™ data for other equipment.
Other features
・ IPX8 submersible (1 m depth of water for 60 minutes)
・ Dual and Tri-watch functions
・ Weather channels with alert function
・ DSC Multi-task function
・ AquaQuake™ prevents audio degradation from a water-logged speaker
・ Instant-access button for Channel 16 and call channel
・ Supplied speaker microphone, HM-205RB can be connected to the rear panel
・ Compatible with the Icom’s marine navigation system, MarineCommander™
General
Frequency range | TX | 156.025–161.600 MHz |
---|---|---|
RX | 156.050–163.275 MHz | |
CH70 | 156.525 MHz | |
AIS1, 2 | 161.975, 162.025 MHz | |
Usable channels | USA, CAN, INT, WX channels | |
Type of emission | 16K0G3E (FM), 16K0G2B (DSC) | |
Power supply requirement | 13.8 V DC (11.7–15.9 V DC) | |
Current drain | TX 25 W output | 6.0 A |
RX Max. audio | 8.0 A | |
Operating temperature range | –20°C to +60°C; –4°F to +140°F | |
Antenna impedance | 50 Ω (SO-239) | |
Weight (approximately) | 1510 g; 3.3 lb |
Transmitter
Output power (at 13.8 V DC) | 25 W, 1 W |
---|---|
Max. frequency deviation | ±5 kHz |
Frequency tolerance | ±5 ppm |
Spurious emissions | Less than –70 dBc (at 25 W) |
Residual modulation | More than 40 dB |
Adjacent channel power | More than 70 dB |
Receiver
Intermediate frequency | 30.15 MHz, 450 kHz (1st/2nd) | |
---|---|---|
CH70 | 21.70 MHz, 450 kHz (1st/2nd) | |
Sensitivity (at 12 dB SINAD) | 0.22 μV typical | |
CH70 (1% BER) | 0.71 μV emf typical | |
Adjacent channel selectivity | More than 80 dB | |
CH70 (1% BER) | More than 80 dBμ emf | |
Spurious response | More than 77 dB | |
CH70 (1% BER) | More than 73 dBμ emf | |
Intermodulation | More than 80 dB | |
CH70 (1% BER) | More than 73 dBμ emf | |
Hum and noise | More than 40 dB | |
Audio output power (at 10% distortion) | More than 15 W with a 4Ω external speaker |
Measurements made in accordance with TIA/EIA 603 and IEC62238. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
Standard |
MIL-810 G |
|
---|---|---|
Method |
Proc. |
|
Low Pressure | 500.5 | I, II |
High Temperature | 501.5 | I, II |
Low Temperature | 502.5 | I, II |
Temperature Shock | 503.5 | I–C |
Solar Radiation | 505.5 | I |
Rain | 506.5 | I, III |
Humidity | 507.5 | II |
Salt Fog | 509.5 | – |
Dust Blowing | 510.5 | I |
Immersion | 512.5 | I |
Vibration | 514.6 | I |
Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
Ingress Protection Standard |
|
---|---|
Water | IPX8 (1 m depth water for 60 minutes) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Speaker microphone, HM-205RB
- GNSS antenna, UX-241
- Microphone hanger
- DC power cable
- Conversion cable, OPC-2384*
- Mounting bracket kit
* Not supplied depending on version
- CB2000
Introducing the advanced CB2000 AIS transponder unit which transforms the ICOM IC-M506GE/EURO, IC-M510E and IC-M605EURO to VHF/DSC radios complete with Class B AIS transponders. The CB2000 also provides a simple solution for those customers who already own an IC-M506GE/EURO, IC-M510E or IC-M605EURO and wish to upgrade their radios with the purchase of this Class B AIS transponder. - HM-205RB
Speaker Microphone - HM-229B
COMMANDMIC (Black) for IC-M605EURO. Requires OPC-2384. - HM-229W
COMMANDMIC (White) for IC-M605EURO. Requires OPC-2384. - MA-500TR
Designed for Non- SOLAS vessels such as pleasure craft, workboats and small vessels, the MA-500TR is a compact, waterproof Class B AIS transponder that actively notifies other vessels of your exact position, thus increasing your safety at sea. The MA-500TR also has a dual channel receiver allowing boat owners to receive AIS information (both Class A and Class B AIS signals) on two channels simultaneously. This real-time information is then displayed on its large, backlit full dot-matrix display giving the boat owner real-time vessel traffic information thus aiding navigation and collision avoidance. The MA-500TR can work independently or connect with a PC or other marine network equipment. When connected to a compatible Icom VHF radio , an individual DSC call can be made easily from the MA-500TR. - MA-510TR
The MA-510TR is an all in one stand-alone unit that combines both AIS transponder and a sharp display in a compact design that features an attractive and easy to read the wide-angled colour screen, legible even in direct sunlight. The MA-510TR advanced AIS transponder boasts a whole host of important features including a navigation function that guides the operator to their destination, silent mode, USB-connectivity, man overboard navigation function and collision alarm function. - MB-75
Marine Flush Mount Kit - MOUNT.002
Simple flush mount for Icom marine fixed radios - MR-1010RII
Marine radar with simplified ARPA and wide viewing angle colour TFT LCD. Has 36 nautical mile range with 4kW output radome scanner. - OPC-1540
20 FT/ 6 metre cables with waterproof mounting plug. - OPC-1541
Extension cable for HM-162B/SW/E (6m/20ft) - OPC-2377
Extension cable for OPC-2383/RC-RM600 (10m). Up to four cables can be connected. - OPC-2383
10m cable for RC-RM600 (same as supplied with RC-M600) - RC-M600
Command Head For IC-M605 - SP-37
External Hailer Horn Speaker with Bracket - UT-112
The UT-112 Voice Scrambler allows private VHF communication when using the Icom IC-M506GE and IC-M605EURO. - UX-241
External GNSS Antenna. Same as supplied with IC-M605EURO. - UX-251
AIS Receiver Unit for the IC-M605EURO