TLF 22 80 80 10 MAN-FRE 08-16
NETTBUTIKK - MENY

QuCam 240SM 3xPoE Gateway LTE Uteskap

Spør kundeservice
QCK-240 - EM-111885
6790 ,-
Eks mva Inkl mva
Tilgjengelig
+ −
Lagre i produktlisten
  • Utendørs LTE gateway for 3 PoE kameraer

  • QuCam 240SM 3xPoE Gateway LTE Uteskap

    Wireless Industries har denne løsningen for utplassering av 1-3 PoE-kameraer. Perfekt løsning for å få plassert ut 3 kameraer i utfordrende omgivelser som for eksempel byggeplasser. Det smarteste ved løsningen er at strøm til løsningen besørges over PoE - det vil si at man kan strekke en nettverkskabel inntil 100m fra et punkt hvor man får strøm. I løsningen er det inkludert en PoE-switch med tre ledige uttak til f.eks. kameraer, og en Cat4 4G-ruter så man kan velge om internett skal gis fra en fastlinje eller 4G.

    Løsningen består altså av ;

    • en robust utendørs innkapsling (IP67) med utføringer til 4 nettverkskabler og en SIM
    • integrerte antenner for 4G (retningsbestemt) og WiFi (rundstrålende)
    • en PoE-switch 802.3af 
    • en Cat4 LTE-ruter
    • I tillegg følger det med en passiv PoE injektor for å gi strøm til løsningen fra nærmeste 230V kontakt.

     

    Spesifikasjoner:

    • LTE-antenne :
      • Frekvenser : 694 - 960, 1700 - 2200,  2200-2700 MHz
      • Maks gain :
      • 694 - 960 MHz : 4 dBi
      • 1700 - 2200 MHz : 5 dBi
      • 2200-2700 MHz : 6 dBi
      • Åpningsvinkel : 90°/90° +/- 30°
      • Polarisering: Vertikal
      • Impedanse: 50 O
      • VSWR <1.3 max < 1.8
    • WiFi :
      • Frekvenser : 2.4 - 2.5GHz IEEE 802.11b/g/n AP+STA
      • VSWR <1.70 max < 2.00
      • Gain : 6dBi
      • Åpningsvinkel : 360°/25° +/- 5°
      • Polarisering: Vertikal
      • Impedanse: 50 O
    • PoE Switch :
      • LAN-porter : 6 x RJ45 10/100Mbps
      • PoE Input : 1 x passiv PoE 44-60V
      • PoE Output: 4 x 802.3af/at + 1 x Passive PoE 24V/7.2W
      • Passive PoE mode: mode B (4,5+) (7,8-)
      • Temperaturtoleranse: -10°C til + 40°C

     

     

     

    LTE ANTENNA SPECIFICATION
    Frequency 0.694 - 0.96 GHz
    1.7 - 2.2 GHz
    2.5 - 2.7 GHz
    Supported LTE/5G bands 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 17, 18, 19, 20, 23, 25, 26, 27, 28, 29, 33, 34, 35, 36, 37, 38, 39, 44, 59, 62, 65, 66, 67, 68, 69, 85, n80, n81, n82, n83, n84, n86, n89, n95
    Gain 0.694 - 0.96 GHz : 2 dBi
    1.7 - 2.2 GHz : 2 dBi
    2.5 - 2.7 GHz : 4 dBi
    VSWR <1.50, max <2.50
    Beamwidth 360°/25° ±5°
    Polarization Vertical
    Impedance 50 Ω
    WI-FI ANTENNA SPECIFICATION
    Frequency 2.40 - 2.50 GHz
    Gain 3 dBi
    VSWR <1.70, max <2.00
    Beamwidth 360°/25° ±5°
    Polarization Vertical
    Impedance 50 Ω
    PoE SWITCH SPECIFICATION
    LAN Ports 6x RJ45 10/100Mbps
    PoE Input 1x Passive PoE input 44-60V (LAN_5)
    PoE Output 4x Active PoE 802.3af/at (LAN_1-4)
    1x Passive PoE output 24V/7.2W (LAN_6)
    PoE Output protection LAN_1-4: 0.75A, LAN_5: 1.25A (separate resettable fuses)
    Passive PoE mode mode B (4,5+) (7,8-)
    LEDs 1x Power on (white, on board), 6x Link (orange, on port), 6x Transmit (green, on port)
    Operating temperature -10°C … +40°C
    Installation 4x holes ⌀2.5mm
    Dimensions 73mm x 145mm x 17mm (WxLxH)
    Weight 69.5g
    POWER SUPPLY ELECTRICAL INPUT SPECIFICATION
    Input voltage 110 … 240VAC
    Input frequency 50 … 60Hz
    Input current max. 2A RMS
    Inrush current max. 30A
    AC leakage current max. 3.5mA
    Efficiency min. 80% @ 100VAC, 84% @ 240VAC
    Dielectric strength (primary to secondary) 2kVAC/5mA/1s
    Input socket IEC320-C6
    AC power cord 1.5m length, 3 pins EU or UK plug
    POWER SUPPLY ELECTRICAL OUTPUT SPECIFICATION
    Output voltage 56VDC
    Min. load 0A
    Max. load 1A
    Peak load 1.46A
    Output power 56W
    Line regulation ± 3%
    Load regulation ± 5%
    Ripple 560mVpp
    Turn on delay time max. 5s
    Rise time max. 40ms
    Hold up time min. 5ms
    Overshoot max. 15%
    Protecions Short circuit, over current (110 … 200% of DC output)
    Ethernet ports Input (LAN): 1x RJ45 10/100Mbps
    Output (PoE): 1x RJ45 10/100Mbps
    PoE mode mode B: pins 4,5 + / pins 7,8 -
    LEDs Green: Power supply is on, Orange: PoE device connected
    POWER SUPPLY MECHANICAL SPECIFICATION
    MTBF 30,000 operating hours confidence-level at 80% load, 25°C
    Operating temperature -10°C … +45°C
    Storage temperature -20°C … +85°C
    Humidity 5% @ 0°C, 90% @ 40°C
    Size 146 x 59 x 30mm (LxWxH)
    Safety CE: EMC/LVD / FCC Part 15 Class B/ EN55022 Class B/ EN55024
    MOBILE
    Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
    Supported frequency bands 4G (LTE-FDD): B1 (2100 MHz), B3 (1800 MHz), B7 (2600 MHz), B8 (900 MHz), B20 (800 MHz), B28A (700 MHz)
    3G: B1 (2100 MHz), B8 (900 MHz)
    2G: B3 (1800 MHz), B8 (900 MHz)
    • Other supported bands on demand – please ask us
    Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
    Bridge Direct connection (bridge) between mobile ISP and device on LAN
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
    Black/White list (optional) Operator black/white list
    Multiple PDN (optional) Possibility to use different PDNs for multiple network access and services
    Band management Band lock, Used band status display
    WIRELESS
    Wireless mode IEEE 802.11b/g/n, Access Point (AP), Station (STA)
    WiFi WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
    WiFi security WPA2-Enterprise - PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation
    SSID SSID stealth mode and access control based on MAC address
    WiFi users Up to 50 simultaneous connections
    Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
    ETHERNET
    WAN 1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
    LAN 1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
    NETWORK
    Routing Static routing, Dynamic routing (Optional - BGP, OSPF v2, RIP v1/v2)
    Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL)
    VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
    Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
    Firewall Port forward, traffic rules, custom rules
    DHCP Static and dynamic IP allocation, DHCP Relayd
    QoS Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
    DDNS Supported >25 service providers, others can be configured manually
    Network backup VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
    Load balancing Balance your internet traffic over multiple WAN connections
    NetSnapper (optional) Mobile connection management, data compression VPN client (not available in standard FW)
    SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)
    SECURITY
    Authentication Pre-shared key, digital certificates, X.509 certificates
    Firewall Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
    Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
    WiFi security WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes, Client separation
    VLAN Tag based VLAN separation
    Mobile quota control Set up custom data limits for the SIM card
    WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
    Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
    VPN
    OpenVPN Multiple clients and server can be running simultaneously, 12 encryption methods
    OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
    IPsec IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
    GRE GRE tunnel
    PPTP, L2TP Client/Server services can run simultaneously
    Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code
    SSTP SSTP client instance support
    MONITORING & MANAGEMENT
    WEB UI HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
    FOTA Firmware update from sever, automatic notification
    SSH SSH (v1, v2)
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
    TR-069 (optional) OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
    MQTT MQTT Broker, MQTT publisher
    SNMP SNMP (v1, v2, v3), SNMP trap
    JSON-RPC Management API over HTTP/HTTPS
    MODBUS MODBUS TCP status/control
    RMS Teltonika Remote Management System (RMS)
    SYSTEM CHARACTERISTICS
    CPU Atheros Hornet, MIPS 24Kc, 400 MHz
    RAM 64 MB, DDR2
    FLASH memory 16 MB SPI Flash
    FIRMWARE / CONFIGURATION
    WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
    FOTA Update FW/configuration from server
    RMS Update FW/configuration for multiple devices
    Keep settings Update FW without losing current configuration
    FIRMWARE CUSTOMIZATION
    Operating system RutOS (OpenWrt based Linux OS)
    Supported languages Busybox shell, Lua, C, C++
    Development tools SDK package with built environment provided
    INPUT/OUTPUT
    Input 1 x Digital non-isolated input (on 4 pin power connector)
    Output 1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector)
    Events SMS, EMAIL, RMS
    POWER
    Connector 4 pin industrial DC power socket (inside QuRouter enclosure, no access from outside of the product, to get access please install additional QuPS4)
    Input voltage range 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max
    PoE (passive) Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at
    Power consumption < 5 W
    PSU included 24V 0.8A Passive PoE with EU or UK or US power cord (QuPSU P248)
    PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS, SIM)
    Ethernet 2 x RJ45 ports, 10/100 Mbps (1x RJ45 with Passive PoE outside enclosure, 1x RJ45 inside enclosure - access from outside of QuRouter is possible after install additional QuRJ45)
    I/O’s 1 Digital Input, 1 Digital Output on 4 pin power connector (access to INPUT/OUTPUT connector after open enclosure of QuRouter or install QuGland / QuPS4 which is not included in set)
    Status LEDs Not visible from outside of enclosure, 3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
    SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
    Power Passive PoE power support and 4 pin DC connector inside enclosure (to get access please install additional QuPS4)
    Reset Factory reset button (no access from outside of enclosure, to get access please install additional QuRST)
    OPERATING ENVIRONMENT
    Operating temperature -40 °C to 75 °C
    Operating humidity 10% to 90% non-condensing
    Ingress Protection Rating IP67
    MTBF 310000 h
    REGULATORY & TYPE APPROVALS
    Regulatory CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance

Produktark

Relaterte produkter
 
 
 
 
 
SEND FORESPØRSEL
 
 
 
EUROWORKER INDUSTRIELL KOMMUNIKASJON
RASK LEVERING OVER HELE LANDET

Med eget lager og stort distributørnettverk, setter vi himmel og jord i bevegelse for å raskt levere din bestilling.

KVALITET OG GOD KJØPSOPPLEVELSE

Vi er opptatt av å gjøre en god jobb for deg. Hvis du mener vi kan forbedre oss, er vi takknemling for enhver tilbakemelding - ring på 22 80 80 10.

PRODUKTKUNNSKAP OG KJØPSTRYHHGET

Kontakt en kunderådgiver på 22 80 80 10. Vi tenker konsept, stiller spørsmål og lytter for å finne fram til produktløsninger som best dekker behovene.