ANTENNER - RADIOKOMMUNIKASJON

N280-01F: To innvendige (hun) 1"-14 TPI-gjenger. Åpning for kabel
N280-03F: Én innvendig (hun) 1"-14 TPI-gjenge og én utvendig (han) 1¼"-11 TPI-gjenge. Åpning for kabel
N280-04F: Én innvendig (hun) 1"-14 TPI-gjenge og én utvendig (han) 1¼"-11 TPI-gjenge. Ingen åpning for kabel

Antenne 1" Adapter tubes (G1" - 11 - 14TPI) - N280-01F N280-03F N280-04F

Tilgjengelig

379 ,-

Disse tre adapterne er produsert i forkrommet messing God korrosjonsmotstand i maritime og krevende miljøer' De er ikke elektriske kontakter, men mekaniske adaptere for smidigere antennemontering Velg modell fra menyen: N280-01F: To innvendige (hun) 1"-14 TPI-gjenger. Åpning...

10000-133: Dette er en standard, kraftig brakett i solid, PU-lakkert messing. Den er designet for å monteres på enten vertikale eller horisontale master/rør med en diameter på 38-75 mm. Denne braketten er allsidig og egner seg for et bredt spekter av maritim og base-stasjon montering.

Scan Antenna 10000-133 - Universal Heavy Duty G1-11 Mast- og rekkeverkfeste

Tilgjengelig

1035 ,-

Scan Antenna 10000-133 - Universal Maste- og rekkeverkfeste Leveres i 2 modeller, velg fra menyen: 10000-133 : Dette er en standard, kraftig brakett i solid, PU-lakkert messing. Den er designet for å monteres på enten vertikale eller horisontale master/rør med en diameter på...

Scan Antenna 10000-141 - Polert stål Mast- og rekkeverkfeste (lette antenner)

Scan Antenna 10000-141 - Universal Maste- og rekkeverkfeste (lette antenner)

Tilgjengelig

375 ,-

Polished stainless steel bracket Polished stainless steel bracket for installation of marine and base station antennas on horizontal or vertical rail or on mast/wall NOTE! Not suitable for heavy type antennas Diam rør: Ø 10 - 30 mm MECHANICAL SPECIFICATIONS Color Polished...

Scan Antenna UHF43-serie 3dB Gain Marine og Baseantenne
EUROWORKER

● UHF Omni Directional
● 3dB Horisontal Gain
● End-fed full 1/2 λ coaxial dipole
● IP66 - Vanntett
● N-hunn antennekontakt
● Gjenget G1"-11 thread
● Max temp. -55C to +70C
● Max Wind Speed 55 m/s
● 3 dB (Marine), 0 dBd, 2.1 dBi
● Max 250 W
● Polarisation Vertical
● Vswr < 1.5
● Impedance 50ohm

Scan Antenna UHF43-serie Marine og Baseantenne (3dB Gain - Marine)

Tilgjengelig

1537 ,-

Scan Antenna UHF43-serie: Antennens enhetsforsterkning (3dB Marine, 0 dBd) gir et vertikalt komprimert og derfor forsterket horistonal rundstrålende bred dekning. Dette er ideelt strålingsmønster på fartøy som trenger en stabil og uavbrutt kommunikasjonskobling upåvirket av rulling og...

Scan Antenna ADAPTER DELRIN 1"-14NF (VHF23, AIS23, AMFM23, VHF33, VHF63)

Tilgjengelig

295 ,-

Adapter for VHF/AIS/AMFM23 Adapter for 1"-14 pipe/mast mount Polished POM adapter Only for VHF/AIS23 Mechanical Specifications: Color Black Weight 12 g Materials POM (Polyoxymethylene) Mounting place On...

Scan Antenna VHF74 - 4dB Gain Marine Glassfiber Antenna (156-162,5MHz)

Tilgjengelig

1250 ,-

Scan Antenna VHF74 - 4dB Gain Marine Glassfiber Antenna (156-162,5MHz)

Scan Antenna AIS74 4 dB AIS Glass Fibre (161.5-162.5 MHz)

Tilgjengelig

875 ,-

4 dB AIS Glass Fibre 1.36 m International Maritime AIS Antenna Long range high gain ● VHF for AIS 161.5-162.5 MH ● 4 dB (Marine), 0.5 dBd, 2.6 dBi ● 2,6m pisk ● UHF-female

Scan Antenna VHFGPS4 Dual Band Marine Antenna Combined VHF and GNSS (11604-722)

Tilgjengelig

Ta kontakt for oppdatert pris

3 dB Dual Band Marine VHF and GNSS Glass Fibre Antenna 1.1 m Denne spesial antennen er bestillingsvare og leveres i en rekke versjoner (se nedenfor) Ta kontakt for tilpasset tilbud Dual band antenna combining the International Maritime VHF band and four satellite...

Scan Antenna Diplexer 10100-000 Kompakt løsning for VHF og GNSS i én kabel

Tilgjengelig

1475 ,-

Scan Antenna Diplexer 10100-000 Kompakt løsning for VHF og GNSS i én kabel DIPLEXER 108/136 (FME) 15 318 IP Low profile low-loss 3-port diplexer with adhesive pad for easy installation SMD FILTER DESIGN Enkel forklaring Scan Antenna Diplexer 10100-000 er en smart liten enhet...

UNIVERSAL ANTENNA SUPPORT (Max Ø 50mm)

Tilgjengelig

389 ,-

Galvanized 2x M8 U-bolts with accessories included Resistant to corrosion Horizontal or vertical installation Max mast diameter 50mm Length ca. 30 cm

RAIL SWIVEL MOUNT IN STAINLESS STEEL – HORIZONTAL AND VERTICAL RAIL
Rail ratchet mount stainless steel electropolished, design with handle locking and hole for GPS. Easily installation on vertical or horizontal rails of 7/8” (22mm) and 1” (25mm). Usable with antennas no longer than 8’ (2,4 m) in self supporting mode. Standard thread 1”x14 .

Glomex RA165 Rail Swivel Mount horisontalt eller vertikalt feste (1"-14TPI)

Tilgjengelig

875 ,-

Glomex RA165 Rail Swivel Mount horisontalt eller vertikalt feste (1"-14TPI) RAIL SWIVEL MOUNT IN STAINLESS STEEL – HORIZONTAL AND VERTICAL RAIL Rail ratchet mount stainless steel electropolished, design with handle locking and hole for GPS. Easily installation on vertical or horizontal...

Glomex V9174 ● Feste 1″ x 14TPI
● Vekt 240g
● Høyde 100mm
● Diam sokkel 70mm
V9174
Euroworker

Glomex V9174 Universal Mount for antenna

Tilgjengelig

675 ,-

● Feste 1″ x 14TPI ● Vekt 240g ● Høyde 100mm ● Diam sokkel 70mm

Glomex V9176 L Masthead Mount Bracket 1"-14TPI

Tilgjengelig

527 ,-

Glomex V9176 L Masthead Mount Bracket 1"-14TPI Høyde 200mm L masthead bracket in stainless steel electropolished L masthead bracket in stainless steel electropolished, standard thread 1”x14, height 8” (200 mm).

Glomex V9177 Universal Mast Mount Bracket (1"-14TPI)

Tilgjengelig

627 ,-

Glomex V9177 Universal Mast Mount Bracket (1"-14TPI) UNIVERSAL ELECTROPOLISHED STAINLESS STEEL MOUNT UNIVERSAL ELECTROPOLISHED STAINLESS STEEL MOUNT FOR ANTENNAS AND EXTENSIONS – 40 MM (13/8”) – STANDARD THREAD 1”X14.

Antenna extension RA103-60
Glomex antennas’ extensions are used for vertical elevation of the antenna in order to clear the reception/transmission field. They can be made of stainless steel or UV resistant fibreglass, with standard 1″”x14 thread, and they are the ideal complement to all Glomex antennas (VHF, AIS, etc.). RA103/60 is a stainless steel extension, 600 mm/24” high.

Glomex RA106-60 - Antenna Mount extension 600mm

Tilgjengelig

1699 ,-

Antenna extension RA103-60 Glomex antennas’ extensions are used for vertical elevation of the antenna in order to clear the reception/transmission field. They can be made of stainless steel or UV resistant fibreglass, with standard 1″”x14 thread, and they are the ideal complement to all...

Procom ADT 1-14TPI til G1-11 adapter

Tilgjengelig

589 ,-

Procom ADT Varenr.110000049 https://www.datamatik.no/media/produkt/mm-mount-minimag-en-gb.pdf

Scan Antenna Marine MiMo5G 18102-002 (2 elements) og 10000-183 (4 elements) 4G, 5G, og WiFi antenne

Tilgjengelig

3974 ,-

Multiband Cellular MiMo Antenna Multiband antenna combining the cellular/mobile GSM(2G), UMTS(3G), LTE(4G), 5G NR(5G) and WiFi frequencies for vessel or land based communication. Two versions - 2x2 and 4x4 Merk: kun 18104-002, den lengste med 4 antenneelementer er foreløpig til...

Procom 110000032 - YA Mounting Bracket

Tilgjengelig

589 ,-

YA Mounting bracket Base station antenna mount All necessary parts to mount an antenna based on mounting on 1" threaded tube in the “YA”-fashion

Icom 445-475 MHz Compatible Flexible Helical Antenna with integrated Icom SMA style connector

Tilgjengelig

325 ,-

HE460 (ICOM-SMA), 445-475 MHz Flexible Helical whip antenna with integrated Icom SMA style connector, made for use on ICOM portable transceivers Flexible Helical whip antenna with integrated Icom SMA style connector, made for use on ICOM portable transceivers ELECTRICAL...

CXL 2-3LW/l 100000092 146 - 154 MHz
CXL 2-3LW/lm 100000091 153 - 162 MHz
CXL 2-3LW/hm 100000093 158 - 167 MHz
CXL 2-3LW/h 100000090 166 - 175 MHz

Procom CXL 2-3LW VHF Basestasjon og Marine Antenne

Tilgjengelig

4950 ,-

CXL 2-3LW leveres i følgende modeller: CXL 2-3LW/l 100000092 146 - 154 MHz CXL 2-3LW/lm 100000091 153 - 162 MHz CXL 2-3LW/hm 100000093 158 - 167 MHz CXL 2-3LW/h 100000090 166 - 175 MHz Procom CXL 2-3LW er spesielt designet for radiobølger på spesifikke...

Tre modeller, velg fra menyen:
GNSS-TW-3872-ANT - kun antenne
GNSS-TW-3742-ANT - kun antenne
GNSS-TW-3872-ESM-T - med L festebrakett

GNSS-TW-3872-ANT

Dual-band GNSS antenna.

It's designed for precision dual-frequency positioning and supports a wide range of constellations, including:

GPS (L1/L2)

GLONASS (G1/G2)

Galileo (E1)

BeiDou (B1).
It features a high-gain
Pre-filtered low-noise amplifier (LNA)
Typical gain of 35 dB, which helps reject out-of-band signals like LTE.
The antenna is housed in a permanent, weatherproof enclosure suitable for long-term outdoor installations.

GNSS-TW-3742-ANT:

Single-band, high-gain GNSS antenna that primarily operates on the L1 frequency band.

It covers GPS (L1), GLONASS (G1), Galileo (E1), BeiDou (B1), and SBAS.

The antenna has a high-gain LNA with a typical gain of 40 dB, a high-rejection SAW filter, and an additional pre-filter, making it highly effective at rejecting interfering signals.

It's specifically designed for precision timing and other mission-critical applications.

GNSS-TW-3872-ESM-T: This is the GNSS-TW-3872-ANT antenna model bundled with a specific mounting accessory.

The "ESM-T" stands for "Ext Spacer and Mount," which is an adjustable mounting bracket designed to simplify the installation of Tallysman antennas.

The antenna itself is identical to the GNSS-TW-3872-ANT.

Overlapping Features

All three products share several key features due to being from the same manufacturer and product line:

Accutenna® Technology: They all use Calian's (formerly Tallysman) patented Accutenna® technology, which provides a truly circular polarized signal reception and excellent multipath rejection.11

Multi-Constellation Support: All three are multi-constellation antennas, meaning they can receive signals from multiple GNSS systems (e.g., GPS, GLONASS, Galileo, BeiDou).12

Pre-filtering: They all include some form of pre-filtering in their LNA design to protect against high-amplitude interfering signals, such as those from cellular networks (e.g., LTE) and Wi-Fi.13

Rugged Enclosure: The antennas are housed in a durable, weatherproof enclosure, typically with an IP67 or IP69K rating, making them suitable for harsh outdoor environments.14

Mounting: The antennas are designed for permanent through-hole mounting.15

Unique Properties

GNSS-TW-3872-ANT: Its primary unique feature is its dual-band capability.16 It receives signals on both the L1 and L2 frequencies, making it ideal for applications that require high-precision RTK (Real-Time Kinematic) positioning.17

GNSS-TW-3742-ANT: This antenna's unique property is its focus on the L1 frequency band with a higher LNA gain (40 dB vs. 35 dB for the TW-3872) and a strong pre-filter.18 This makes it particularly well-suited for applications where single-band accuracy and strong out-of-band signal rejection are critical, such as precision timing.19

GNSS-TW-3872-ESM-T: Its unique feature is that it's a product kit. It includes the GNSS-TW-3872-ANT antenna and the ESM-T mounting accessory, providing a complete solution for easy installation.

Roger GNSS ANTENNE (GNSS-TW-3872-ANT, GNSS-TW-3742-ANT, GNSS-TW-3872-ESM-T)

Tilgjengelig

2550 ,-

Tre modeller, velg fra menyen: GNSS-TW-3372-ANT - Singleband - kun antenne GNSS-TW-3742-ANT - Singleband - kun antenne G NSS-TW-3872-ANT - Dualband - kun antenne GNSS-TW-3872-ESM-T - Samme antenne som over + justerbar festebrakett...

Ext Spacer and Mount for GNSS-TW (Tallysman) antennas

Tilgjengelig

1174 ,-

Ext Spacer and Mount for GNSS-TW (Tallysman) antennas Ext Spacer and Mount for GNSS-TW (Tallysman) antennas - GNSS-TW-3372-ANT - GNSS-TW-3742-ANT - GNSS-TW-3872-ANT

L Mount for all Tallysman antennas
GNSS-ANT-L-MOUNT-T (L-mount) fixed antenna mount for easy installation of Tallysman outdoor antennas. L-mount can be installed on a pipe or flat surface. TW-antennas we have available: - GNSS-TW-3372-ANT - GNSS-TW-3742-ANT - GNSS-TW-3872-ANT L Mount for all Tallysman antennas
GNSS-ANT-L-MOUNT-T (L-mount) fixed antenna mount for easy installation of Tallysman outdoor antennas. L-mount can be installed on a pipe or flat surface. TW-antennas we have available: - GNSS-TW-3372-ANT - GNSS-TW-3742-ANT - GNSS-TW-3872-ANT

Roger GNSS-TW L Mount for all Roger/ Calain GNSS antennas

Tilgjengelig

539 ,-

L Mount for all Tallysman antennas GNSS-ANT-L-MOUNT-T (L-mount) fixed antenna mount for easy installation of Tallysman outdoor antennas. L-mount can be installed on a pipe or flat surface. TW-antennas we have available: - GNSS-TW-3372-ANT - GNSS-TW-3742-ANT - GNSS-TW-3872-ANT

Calian GNSS-TW-3990XF-ANT - Multi Constellation Full Band Antenna (37dB)

Tilgjengelig

6679 ,-

GNSS-TW-3990XF-ANT is a high-performance, full-band ( multi-band , specifically referred to as triple-band) It is designed to cover a wide range of GNSS frequencies from multiple constellations, which is a key feature of the Accutenna technology....

ANTENNEUTSTYR

TILBUD & NYHETER