ANTENNER - RADIOKOMMUNIKASJON

N280-01F: To innvendige (hun) 1"-14 TPI-gjenger. Åpning for kabel
N280-03F: Én innvendig (hun) 1"-14 TPI-gjenge og én utvendig (han) 1¼"-11 TPI-gjenge. Åpning for kabel
N280-04F: Én innvendig (hun) 1"-14 TPI-gjenge og én utvendig (han) 1¼"-11 TPI-gjenge. Ingen åpning for kabel

Antenne 1" Adapter tubes (G1" - 11 - 14TPI) - N280-01F N280-03F N280-04F

VAREKODE: N280-01F N280-03F N280-04F

379 ,-

+ −

10000-133: Dette er en standard, kraftig brakett i solid, PU-lakkert messing. Den er designet for å monteres på enten vertikale eller horisontale master/rør med en diameter på 38-75 mm. Denne braketten er allsidig og egner seg for et bredt spekter av maritim og base-stasjon montering.

Scan Antenna 10000-133 - Universal Heavy Duty G1-11 Mast- og rekkeverkfeste

VAREKODE: 10000-133 10000-133A

1035 ,-

+ −

Scan Antenna 10000-141 - Polert stål Mast- og rekkeverkfeste (lette antenner)

Scan Antenna 10000-141 - Universal Maste- og rekkeverkfeste (lette antenner)

VAREKODE: 10000-141

375 ,-

+ −

Scan Antenna UHF43-serie 3dB Gain Marine og Baseantenne
EUROWORKER

● UHF Omni Directional
● 3dB Horisontal Gain
● End-fed full 1/2 λ coaxial dipole
● IP66 - Vanntett
● N-hunn antennekontakt
● Gjenget G1"-11 thread
● Max temp. -55C to +70C
● Max Wind Speed 55 m/s
● 3 dB (Marine), 0 dBd, 2.1 dBi
● Max 250 W
● Polarisation Vertical
● Vswr < 1.5
● Impedance 50ohm

Scan Antenna UHF43-serie Marine og Baseantenne (3dB Gain - Marine)

VAREKODE: 14043-431 A, B, C, D, E

1537 ,-

+ −

Scan Antenna ADAPTER DELRIN 1"-14NF (VHF23, AIS23, AMFM23, VHF33, VHF63)

VAREKODE: 10000-451

295 ,-

+ −

Scan Antenna VHF74 - 4dB Gain Marine Glassfiber Antenna (156-162,5MHz)

1250 ,-

+ −

Scan Antenna AIS74 4 dB AIS Glass Fibre (161.5-162.5 MHz)

VAREKODE: 12074-002

1075 ,-

+ −

Scan Antenna VHFGPS4 Dual Band Marine Antenna Combined VHF and GNSS (11604-722)

VAREKODE: 11604-722 - 10100-000

Ta kontakt for oppdatert pris

Scan Antenna Diplexer 10100-000 Kompakt løsning for VHF og GNSS i én kabel

VAREKODE: 10100-000

1475 ,-

+ −

UNIVERSAL ANTENNA SUPPORT (Max Ø 50mm)

VAREKODE: URI-38Z30 E8792C

389 ,-

+ −

RAIL SWIVEL MOUNT IN STAINLESS STEEL – HORIZONTAL AND VERTICAL RAIL
Rail ratchet mount stainless steel electropolished, design with handle locking and hole for GPS. Easily installation on vertical or horizontal rails of 7/8” (22mm) and 1” (25mm). Usable with antennas no longer than 8’ (2,4 m) in self supporting mode. Standard thread 1”x14 .

Glomex RA165 Rail Swivel Mount horisontalt eller vertikalt feste (1"-14TPI)

VAREKODE: RA165

875 ,-

+ −

Glomex V9174 ● Feste 1″ x 14TPI
● Vekt 240g
● Høyde 100mm
● Diam sokkel 70mm
V9174
Euroworker

Glomex V9174 Universal Mount for antenna

VAREKODE: V9174

675 ,-

+ −

Glomex V9176 L Masthead Mount Bracket 1"-14TPI

VAREKODE: V9176

527 ,-

+ −

Glomex V9177 Universal Mast Mount Bracket (1"-14TPI)

VAREKODE: V9177

627 ,-

+ −

Antenna extension RA103-60
Glomex antennas’ extensions are used for vertical elevation of the antenna in order to clear the reception/transmission field. They can be made of stainless steel or UV resistant fibreglass, with standard 1″”x14 thread, and they are the ideal complement to all Glomex antennas (VHF, AIS, etc.). RA103/60 is a stainless steel extension, 600 mm/24” high.

Glomex RA106-60 - Antenna Mount extension 600mm

VAREKODE: RA103-60

1699 ,-

+ −

Procom ADT 1-14TPI til G1-11 adapter

VAREKODE: 110000049

589 ,-

+ −

Scan Antenna Marine MiMo5G 18102-002 (2 elements) og 10000-183 (4 elements) 4G, 5G, og WiFi antenne

VAREKODE: MiMo5G-4 18104-001 (MiMo5G-2 18102-002*)

3974 ,-

+ −

Procom 110000032 - YA Mounting Bracket

VAREKODE: 110000032

589 ,-

+ −

CXL 2-3LW/l 100000092 146 - 154 MHz
CXL 2-3LW/lm 100000091 153 - 162 MHz
CXL 2-3LW/hm 100000093 158 - 167 MHz
CXL 2-3LW/h 100000090 166 - 175 MHz

Procom CXL 2-3LW VHF Basestasjon og Marine Antenne

VAREKODE: CXL 2-3LW

4950 ,-

+ −

Tre modeller, velg fra menyen:
GNSS-TW-3872-ANT - kun antenne
GNSS-TW-3742-ANT - kun antenne
GNSS-TW-3872-ESM-T - med L festebrakett

GNSS-TW-3872-ANT

Dual-band GNSS antenna.

It's designed for precision dual-frequency positioning and supports a wide range of constellations, including:

GPS (L1/L2)

GLONASS (G1/G2)

Galileo (E1)

BeiDou (B1).
It features a high-gain
Pre-filtered low-noise amplifier (LNA)
Typical gain of 35 dB, which helps reject out-of-band signals like LTE.
The antenna is housed in a permanent, weatherproof enclosure suitable for long-term outdoor installations.

GNSS-TW-3742-ANT:

Single-band, high-gain GNSS antenna that primarily operates on the L1 frequency band.

It covers GPS (L1), GLONASS (G1), Galileo (E1), BeiDou (B1), and SBAS.

The antenna has a high-gain LNA with a typical gain of 40 dB, a high-rejection SAW filter, and an additional pre-filter, making it highly effective at rejecting interfering signals.

It's specifically designed for precision timing and other mission-critical applications.

GNSS-TW-3872-ESM-T: This is the GNSS-TW-3872-ANT antenna model bundled with a specific mounting accessory.

The "ESM-T" stands for "Ext Spacer and Mount," which is an adjustable mounting bracket designed to simplify the installation of Tallysman antennas.

The antenna itself is identical to the GNSS-TW-3872-ANT.

Overlapping Features

All three products share several key features due to being from the same manufacturer and product line:

Accutenna® Technology: They all use Calian's (formerly Tallysman) patented Accutenna® technology, which provides a truly circular polarized signal reception and excellent multipath rejection.11

Multi-Constellation Support: All three are multi-constellation antennas, meaning they can receive signals from multiple GNSS systems (e.g., GPS, GLONASS, Galileo, BeiDou).12

Pre-filtering: They all include some form of pre-filtering in their LNA design to protect against high-amplitude interfering signals, such as those from cellular networks (e.g., LTE) and Wi-Fi.13

Rugged Enclosure: The antennas are housed in a durable, weatherproof enclosure, typically with an IP67 or IP69K rating, making them suitable for harsh outdoor environments.14

Mounting: The antennas are designed for permanent through-hole mounting.15

Unique Properties

GNSS-TW-3872-ANT: Its primary unique feature is its dual-band capability.16 It receives signals on both the L1 and L2 frequencies, making it ideal for applications that require high-precision RTK (Real-Time Kinematic) positioning.17

GNSS-TW-3742-ANT: This antenna's unique property is its focus on the L1 frequency band with a higher LNA gain (40 dB vs. 35 dB for the TW-3872) and a strong pre-filter.18 This makes it particularly well-suited for applications where single-band accuracy and strong out-of-band signal rejection are critical, such as precision timing.19

GNSS-TW-3872-ESM-T: Its unique feature is that it's a product kit. It includes the GNSS-TW-3872-ANT antenna and the ESM-T mounting accessory, providing a complete solution for easy installation.

Roger GNSS ANTENNE (GNSS-TW-3872-ANT, GNSS-TW-3742-ANT, GNSS-TW-3872-ESM-T)

VAREKODE: GNSS-TW-3872-ANT

2550 ,-

+ −

Ext Spacer and Mount for GNSS-TW (Tallysman) antennas

VAREKODE: GNSS-ESM-T

1174 ,-

+ −

L Mount for all Tallysman antennas
GNSS-ANT-L-MOUNT-T (L-mount) fixed antenna mount for easy installation of Tallysman outdoor antennas. L-mount can be installed on a pipe or flat surface. TW-antennas we have available: - GNSS-TW-3372-ANT - GNSS-TW-3742-ANT - GNSS-TW-3872-ANT L Mount for all Tallysman antennas
GNSS-ANT-L-MOUNT-T (L-mount) fixed antenna mount for easy installation of Tallysman outdoor antennas. L-mount can be installed on a pipe or flat surface. TW-antennas we have available: - GNSS-TW-3372-ANT - GNSS-TW-3742-ANT - GNSS-TW-3872-ANT

Roger GNSS-TW L Mount for all Roger/ Calain GNSS antennas

VAREKODE: GNSS-ANT-L-MOUNT-T

539 ,-

+ −

Calian GNSS-TW-3990XF-ANT - Multi Constellation Full Band Antenna (37dB)

VAREKODE: GNSS-TW-3990XF-ANT

6679 ,-

+ −

Procom CXL 70-3LW - 3 dBd Gain UHF Basestasjon og Marine Antenne

VAREKODE: CXL 70-3LW - 110000089

3699 ,-

+ −

ANTENNEUTSTYR

TILBUD & NYHETER